Productive Day

Wool roving dyed in the crockpot -
crimson red, lilac, and chocolate

Then spun into a single which was plied with
a single of carmel colored alpaca to make this pretty yarn.

More wool roving dyed in the crockpot -
teal, brilliant blue and chocolate

Here it is as a singles yarn

Christmas gifts

Now that the celebration is over and the presents have all been opened, I can post photos.

Feline approved

What you don't see in the picture is what they were doing just a few seconds before this photo was snapped. The camera never seems to be available when you need it, huh? Just seconds before they were acting as if the brown rug had catnip woven into it! They were rolling and stretching and rubbing their faces all over the nubby brown texture.

These are two more rugs for Christmas presents. I feel fairly safe posting these as the recipients are too little to be reading blogs. LOL

Recycle Weaving

A few months ago I was cleaning out closets with the intent to donate to Goodwill. A lot did go to Goodwill but some of the t-shirts and jeans were not Goodwill quality (rips, stains, spilled paint, etc) so I set them aside. I knew I could use them to make throw rugs. Around the same time I was creating my dye samples. I put aside the leftover dye for an upcoming guild dye day. When that day came, I grabbed a bunch of t-shirts and put the leftover dye to good use.



The beauty of this was the lack of precision. A drip here, a dribble there, a splash of this color, a squeeze of that color. I used up all of the excess dyes. The above photo shows all of the dyed t-shirts stacked up ready to go home. I forgot to get in-process photos. Oops. Took them home, tossed them in the washer and dryer and they're ready to be prepared for weaving.

I cut off the sleeves and the bottom hem. Then I cut the shirts into strips parallel to the bottom hem. I cut these strips 2" wide. You get some pretty long strips until you get to the chest section where the sleeves were but even those strips are useable. When I joined the strips to make my weft, I alternated a long and short strip so that the knots were fairly evenly spaced apart.

For the jeans, I used the fabric from the legs. I could have saved the pockets and waistbands for another project but really, I have enough stuff in my house and need to start purging. Jeans are always getting worn out so if I ever do desire to make a project using jean pockets, I'll just start saving then. The jean fabric, because it's considerably thicker, was cut at 1" widths.

For the warp, I used a Pepto Bismal pink 8/4 carpet warp. It coordinates perfectly with the t-shirts and even looks nice on the jean side. The design is reversible by using a double-weave technique. I made some other rugs last year and really like how thick they come out. This rug is coming out even thicker - must be the jeans. It's going to be so cushy under tiny tootsies. This one is a gift for one of my nieces.

How big is your stash?

In recent posts by Laura Fry, she talks about finishing projects that are using up her stash. If I was as prolific as she is, my stash would be gone after a few projects! Here's every piece of yarn I have:

What does your weaving stash look like?

We have a name!

Our newest cria, the carmel colored one pictured in the previous post, shall be named Darby O'Missy but we'll call her Darby.

I'm still having to go to the ranch daily to give Bliss an antibiotic shot. We got the test results back yesterday and it showed she had a form of e-coli in her bladder causing an infection. So now she's on PenG (a form of Penicillian) and NuFlor. I sure hope this cures her. I feel so bad that she's having to get shots twice a day for the PenG. My fear is she's going to associate bad things with being haltered. I'm just going to have to work extra hard after this is done to keep haltering her and find something that she likes as a treat. She has eaten grain from my hand once so my plan is to give her some of that at the end of each round this week.

Newest, and last for the season, Cria

Here she is! We still haven't settled on a name.


She's standing next to mom in this photo. You can see she's similar in coloring to mom. It'll be interesting to see how her coloring flushes out as she gets older.

I need to buy a lottery ticket!

It's ANOTHER girl!!! That makes 4 in a row.

I'll head down there later today. First I have to collect the kids at the end of school, drop them at their respective activities and then I can head down there. Ethan will come with me so I'll have him take pictures.

Hmmmm.... need a name that starts with "D". Any suggestions?

Speaking of quick

Just after I posted my last entry, my cell phone rang. It was Wayne - "You have another cria on the way." The torture of having animals 40 minutes away!

That was quick

This morning I drove down to Hollister to check on my girls. Actually, I had to stop along the way at Costco to fill up the gas tank and buy a cat tree. Yesterday we were at this same store and the kids insisted we get our cats a tree. At $50, it was a steal but we didn't have room in the car for it so I told the kids I'd get it today. Ethan'll be thrilled - he made sure to remind me this morning of my promise to get it.

While at the ranch, I had 3 tasks to accomplish:
1. give Bliss her Naxcel shot for a bladder infection
2. weigh Ciara
3. catch Ciara visiting the poop pile to make sure all the plumbing works properly

I arrived at the ranch around 10:30am. I figured I'd be there a few hours trying to accomplish the third of my tasks. First, I cleaned up the pen. It gave me a chance to watch the girls. Kay (due sometime in the next few days or months) was laying down and shifting from side to side. Bliss is still going to the poop piles and peeing teaspoons at a time. Murphy is a phenomenal mom - she stands so well for Ciara when she wants to nurse, even moving a leg out of the way if it's needed. Ciara is growing like she should be. She was 19 pounds at birth and was a little over 21 pounds today at 5 days old. Perfect weight gain!

I've been giving Bliss her Naxcel shots (4 so far). This is a first for me - giving shots. Saturday we (Wayne and I) attempted to have me give the shot on my own (i.e. without him holding her). It didn't work - I wasn't confident enough. Today though, I caught her, haltered her, tented the skin, and gave the shot. When I was done, I looked at Wayne and said "Oh! I guess I did that all by myself, huh? Cool!"

A few minutes later, Ciara went to the poop pile and did her business. Steady flow of urine and a nice mass of feces. All's well on that front! Guess I'm done for the day! 11:30 and I'm outta there.

Look who showed up!

Thursday morning I got a call from Wayne to tell me I have a cria on the ground. Yippee!! But wait, it's not October. I wasn't expecting any deliveries until October. Hmmm.... I must have "misfiled" the information the breeder gave me. I'll bet she said she bred in October (which means deliveries in September) but I misheard it as they'd deliver in October. Oops. So while I was at the ranch checking out our new cria, I checked the other mom-to-be and sure enough she's bagged up. That means she'll be delivering soon. Or not - it could be a few weeks from now too. Darn alpacas refuse to read the instruction manual.

Oh - I guess you want to know whether the cria is a girl or a boy? Well, our first two crias were girls so we fully expected to have a crop of boys this year. Not so. It's another girl! We've named her Ciara - pronounced KEE-ra. It's Gaelic for "dark one" referring to coloring as in dark hair and eyes. The name definitely fits her!

Back from Alaska!

But when do things stop moving?

We spent a week on the Holland America cruise ship ms Amsterdam cruising around Southeast Alaska and the Inside Passage. DH took nearly 2000 pictures and is editing them for posting. I've seen the preliminary shots and he's got some that I'll definitely be getting printed and framed. My head is still occasionally "swimming" - apparently it can take up to a week for your equilibrium to work it's way back to normal.

As soon as pictures are available, I'll let everyone know!

Take Along Toys

As a mom of 2 active kids, I find myself "sitting" in the parking lot often. Waiting for school to get out, waiting for lessons to end, waiting for meetings to finish, etc. And with the cost of gas these days, I'm much more inclined to park and wait for the one hour lesson to finish instead of dropping off, going home for 40 minutes, and coming back. So I guess that means even more idle time in my future.

At the same time, I've been wanting to find something new to try. I wanted something that was small and easy to bring along for those idle times but I didn't want to go back to things I've tried in the past: knitting, crochetting, tatting. I thought about doing some embroidery but couldn't find something that inspired me.

Then I read in Tien's blog about the beaded beads her mom does. Now THAT sounded interesting. So I checked out the links to the beading sites that Tien provided and I was hooked! I was thrilled when I found the free bracelet pattern! Now I could try this new interest for a minimal outlay - since I already had beads and needles from other ventures, it only cost me a mere $3 for some beading thread.

I started the pattern last night. I knew I wouldn't have enough green beads to make a whole bracelet but I'd figure something out as I went along. I always do. About 4 rounds into this, I stopped and looked at the lovely beaded bead I had made. It was gorgeous! I could use something like this on my next designed garment. Heck, I could have used something like this on my final project a few months ago. I decided I'd continue and use up the green beads I had and then use the final piece in a simple necklace. The next hurdle would be in figuring out how to string a necklace together. I've never done jewelry before. Oh, but then I remembered I have some purple rat-tail leftover from my Draping Class's final project. That would work perfectly!

What do you think?

Trouble in Mac-land

Weaving of the towels is nearly done. But I've run into a glitch with the shafts. It's not a new problem - I've experienced this on every warp with this loom. I'm hoping someone out there can help. To recap - this loom was previously owned by a local weaver who passed on. I suspect the loom was either never used or rarely used. I was given the original invoice - it was manufactured in 1990. If it was sitting idle - that's a lot of years of deferred maintenance.

The problem is that sometimes when a treadle is pushed, one of the shafts (it varies which specific one) that ISN'T supposed to lift will partially lift. I can hand push the offender down to where it belongs - it feels "tight" like it was squeezed by the surrounding shafts into lifting. In other words, it's definitely not a case of something catching and lifting it. It's probably best to show you.

This is what I should see.


The black bar in the background is the top of the shaft that's partially lifting.


When there's a sticky shaft, the shed looks like this. You can see strings from the stuck shaft hanging out there in the middle.


I suspect the loom needs some lubrication. When I first got this loom I asked about that. Some suggested WD40; others suggested actual oil; and one suggested paraffin. Since my loom sits over carpet, I went with paraffin. I suspect it didn't work so well. It's the metal parts that I suspect need some help; I'm not sure wax was the right choice. Or maybe I just didn't do it right.

I have both WD40 and oil. In fact, I have some spinning wheel oil in one of those long needle bottles. Which do I use? And where do I put it?

Wide Warp

The current project on the Macomber is a 40" wide warp of 5/2 cotton that will use UKI Bamboo (roughly 5/4) in the weft. They're intended to be beach towels for dh's co-worker. The pattern is a modified 5 shaft huck lace. I say modified because I had to put some of the threads from shaft 4 onto a spare shaft (in this case, shaft 6) because I knew I'd run out of heddles. I also put a plain weave selvage onto shafts 7 and 8.

One fear I had with this project was possibly having trouble with throwing a shuttle on such a wide warp. Luckily, I had treated myself to a Bluster Bay end feed shuttle at the recent CNCH conference. Before going to the conference, dh had given me $100 to treat myself. Oh boy, what a treat this pretty thing is!

The shuttle feels so incredibly soft - the craftsmanship is impeccable! And look at these selvages - they're perfect. Another benefit is that weaving goes uber-fast! I'm able to weave up a bobbin's worth in the same time it takes to wind both of the empty pirns I have for this shuttle.

In store for a busy weekend

Dana's dance studio's annual June Showcase is this weekend. For me, this means a lot of driving back and forth from our house to the Campbell Heritage Theater. For the first time I'm seriously considering getting a hotel room somewhere nearby.

I must say, as hard as it might be on parents shuffling kids to and fro, South Bay Dance Center does a phenomenal job with their showcase. They create wonderful opportunities for dancers to get as much stage time as their experience allows. For example, the very young dancers (3-5yo) are only in one program, put on stage at the very beginning of the show, and parents are allowed to pick them up backstage right away. If you've reached a level 1B (usually 9-12yo), then you perform on stage in at least two programs. If you've reached a level 2A or higher, then you're on stage for all 5 programs. Yes, there are 5 shows over the two-day weekend. And IF you're like my daughter, where of the 8 classes she took this year, 6 of them are "performing" classes and of those 6, 3 are level 2 or higher, THEN you are on stage a whole lot.

See what I mean.

Each column represents one of the programs and lists the order of the dances. The pink highlights are when she has to be on stage. There are a few situations (like program 1) where she has to have her hair half up/half down and then within the span of 2 dances has to change costumes and put her hair up in a ballet bun and then again within 2 dances change and take her hair back down to half up/down. They have lots of backstage help but even so, She's in for a challenging weekend!

Welcome to the world of theater daughter! You'll do great! Love, mom

Annual Shearing Day

The girls at their new digs. This is their version of "Don't Take My Picture!" Kay on left, Bliss in center, Murphy on right.


Since Bliss wouldn't cooperate and show us her lovely coloring, we had Dana catch and hold her for us. The 'funny' lighting is because they're standing in between the sun and the shadow of a tree. Click on the pic for a larger version.

Shearing day is a bit of a double-edged sword: it's fun but it's hard work. At Foothill Alpacas where our animals are agisted, we use a table for shearing. To shear an animal, you need:

1 shearer
1 green guy (so called because he holds the head and gets covered in green slime when the 'pacas get upset)
1 toe nail clipper who also helps get the animal onto the table
2 fiber collectors - one for prime and another for neck/leg
2 people to catch - one of those two also blows out the animal
and at least 2 extra people.

The shearer is the boss. Everyone else is there to help him/her in any way they can. The fiber collectors also put the names/dates on the bags and, if desired, pull the fiber sample that gets shipped off for micron testing. The catch people also blow out the animal's fleece (while it's still on the animal) to get rid of any hay bits and dirt. While this does disturb the lock structure, if you're shipping the fleece straight off to processing, it doesn't matter. In fact, the shearer will appreciate it because shearing with all that excess dirt dulls the blades really fast.

The two extra people are in case someone gets hurt. We had 2 shearing days at Foothill this year and had injuries on the first one. That left us a bit short-handed so we made sure we had enough help on the second day.

The FUN part of shearing day is gawking at the 'pacas after their shorn. They always look like something out of a Dr. Seuss book! My favorite books are Dr. Seuss books!

Here's the "after":

Designing a garment by draping

Draping is a method of garment design by where you drape fabric, either a muslin-type or the actual fashion fabric, over a dress form to create the design. Once it is complete on the dress form, the fabric is removed, a paper pattern is created, the paper pattern is trued, and then the final cut of the fabric is made.

I've been sewing all my life. I was lucky enough to have a mom who sewed and taught me at an early age. I've come to understand now that not everyone was so lucky (Thanks mom!). She taught me how to use commercial patterns and over the years I figured out how to mix and match pattern pieces. But designing a garment from scratch was out of my realm.

So in January when I found out the boss I worked for part-time was moving away and I would have some free time, I decided to take a class in the most-excellent fashion design program at West Valley Community College. I had taken classes from the other nearby community college with a fashion design program, Canada College but WVC is muuuuuuch closer. As I'm really a "hands-on" person when it comes to design of any type, FD-060 Professional Draping, really sounded like something up my alley.

In case anyone out there is thinking of taking this class, I won't sugar coat the experience. It was brutal. I expect it would have been less rigorous had I not had prior obligations of chauffeur and chess club coordinator so that I could have gone to lab during the limited hours (that darn Law of Physics - why can't you be in two places at once?). As it was, I could only go on Tuesday and Thursday after class and occasionally on Thursday evenings. Because this class required the use of a dress form, and it couldn't be any ole dress form - it had to be one in the lab, you must get the work done during class or lab. Sewing could be done at home however it consisted of a small portion of the overall work.

At any rate, I can expand on the class's requirements in another post. In this one, I want to skip to the end and show off my final project! But first, let me walk you through the design process.

I wanted to do a jacket. Searching fashion websites turned up these:

The one on the left is nice but not really "me". IOW, it wasn't something I'd normally design. The middle one appeals to my engineering side. I suspect it would take updating all of those skills just to figure it out and frankly, I didn't have that kind of time. The one on the right would look absolutely lovely in a gradient color scheme moving from light to dark top to bottom. But that meant hand-dyeing fabric, and again, not enough time. Then I saw these:

I really liked the shorter sleeves in the one on the left and I loved the collar on the right. The gathered waistline in the left one was going to be a problem though - my dress form was not the skinny-minnie size 6 (which translates to RTW size 0 or 2). I had a size 12 (RTW 6 or 8). All that fabric at the waist would not look flattering. But I could manipulate the fabric into darts (the basic principle of draping). OR..... I could manipulate it into pintucks. Now there's an idea!

The final project required designing a complete outfit: a dress, a shirt and skirt, a jacket and skirt, etc. Since I chose a jacket, it meant I had to figure out a "bottom". Pants weren't covered in this class so I had a choice of a dress (no thank you) or a skirt. I went with a 6-gore skirt as it was something I hadn't worked on in class. It was taught but I ran out of time and never got to that drape. So without further adieu....

The skirt has a flare overlay lined in the same fabric as the collar. That side seam also has piping covered with the collar fabric. I originally put piping in all of the seams but took out all but one because they didn't fit with the overall design. On the other hand, leaving that one seam with piping drew attention to the flare nicely. In the jacket, the sleeves have a "cuff" that has pintucks at the top. If I did this jacket again, I'd leave those off. The collar is folded 3 times on itself - similar to the inspirational design.

Click on the photos to get a closer look!

Long Lost Bamboo Towels

This morning someone on the weaving at yahoogroups email list asked about weaving with bamboo as warp. Last Fall I did a series of huck towels in bamboo on my counterbalance. It was the last thing I wove on that loom before moving it to the garage for storage. (As much as I'd love to have two working floor looms available to use, there are three other people in this house and they deserve room to live too.) But a search for my post on these towels came up empty handed. I guess it was one of those things "I should write about" that never made it to "Publish Post". I'll have to fix that!

Here is a picture of 2 of the towels. The one on the left has been wet finished but not ironed. It does 'grow' a bit once it's ironed. The one to the right (and half of it is under the one on the left) has been turned sideways and is not yet wet finished.

I used UKI Bamboo (aka Bamboodle) from Village Spinning and Weaving as warp and weft. It's quite thick - listed as a 5.24/4 yarn. I sleyed 16 inches set it at 12 epi. My notes say the warp was 3 yards long but it's likely a bit longer than that - rounding up is a good thing to do with warps so that I have enough room to do some samples. My plan was for 4 towels at 22" per towel plus loom waste. Turns out I got 5 towels out of the warp.

The pattern is a traditional huck lace from Davison's "A Handweaver's Pattern Book" on page 94. I played with the pattern and found I could get a plain weave selvage. I also discovered I could change up the huck pattern by changing the treadling. This was a welcome discovery because it meant I could make every towel a bit different.

So, for the final stats:
on loom: 16" wide by about 22" long (depends on the pattern I used)
off loom: 13" wide by 20" long (for one specifically)
wet finished and ironed: 11.5" wide by 14.5" to 15.5" long

The concerned individual wrote to the group worried about abrasion - would commercially spun bamboo hold up as a warp. My counterbalance loom has wire heddles and in the past has shredded novelty, handspun yarns. Thankfully the commercially spun bamboo was completely unfazed. So yes, bamboo works very well as a warp.

Upcoming posts

I've got two posts that I'm dying to publish but can't.

The first one covers that Professional Draping fashion design class I took recently. The final project is done, submitted, graded, and returned. It looks just lovely! But since it's a gift for my sister and she's not seen it yet, I have to wait until her package has been delivered to share the photos with everyone else. USPS tells me it'll arrive on Thursday.

The second post is about shearing day this past Sunday. Our girls were shorn at their new home. I always get a chuckle out of the before and after photos. Dh is away on a business trip so I have to wait until he returns and edits the photos to get them for here. The biggest difference is Bliss. Wait until you see her!